Talk to us

SURYA ENGINEERING
GST : 27AQFPP9378P1ZO

MS Coated PVC Footstep

MS Coated PVC Footstep Specification

Features
Anti-Slip, Corrosion Resistant

Control System
Manual

Equipment Type
Manhole / Access Step

Usage
Manholes, Inspection Chambers, Sewage & Drainage Systems

Condition
New

Size
375*400*25 mm

Height
12 Millimeter (mm)

Product Type
MS Coated PVC Foot Step

Weight
1.7 Kilograms (kg)

Power Source
Manual

Color
Orange/Yellow/Black

Length
12 Millimeter (mm)

Feature
Anti-Slip, Corrosion Resistant

Warranty
1 years

Attributes
Easy To Operate, Strong, Durable, Rust Proof, Flame Proof

MS Coated PVC Footstep Trade Information

Minimum Order Quantity
10 Pieces

Delivery Time
24 Hours

MS Coated PVC Footstep About

MS Coated PVC Footstep / PVC Coated MS Manhole Steps - 12mm Steel Core

An MS Coated PVC Footstep is a step-shaped access component used inside manholes, inspection chambers, sewer chambers, drainage structures, and other underground concrete structures. It is generally made from a mild steel (MS) base with a PVC coating over the stepping area.

The combination is practical: MS provides the structural support, while the PVC coating provides a protective and more user-friendly outer surface. For contractors and infrastructure projects, these footsteps are useful wherever maintenance workers need fixed access into a chamber.

What is MS Coated PVC Footstep?

MS Coated PVC Footstep is an improved version of traditional iron manhole steps. In old construction, plain MS or Cast Iron steps were used which get rusted and broken within 1-2 years inside a sewer.

In MS Coated PVC Footstep, a high-strength Mild Steel (MS) bar is completely encapsulated with PVC (Polyvinyl Chloride) coating. There is no exposure of steel to water, acid or gases. That is why it lasts 15-20 years.

Why Use an MS Coated PVC Footstep?

Entering a deep chamber without fixed steps can make inspection and maintenance difficult.

An MS Coated PVC Footstep provides a dedicated place for the user's feet while climbing through the chamber. The PVC coating also gives the exposed stepping surface a different feel and finish compared with an uncoated steel step.

For infrastructure projects where footsteps may be exposed to moisture and underground conditions, selecting an appropriate material and coating is important.

Why MS Coated PVC is Better Than Plain MS Step?

Plain MS Step	MS Coated PVC Footstep
Gets rusted in 6 months	100% Rust Proof
Slippery when wet	Anti-Skid textured surface
Damaged by sewer gas	Chemical & Acid Resistant
Life 1-2 Years	Life 15+ Years
Needs replacement	Zero Maintenance

How Does an MS Coated PVC Footstep Work?

Several footsteps are installed vertically along the chamber wall.

A worker uses each step to move down into or up from the chamber.

A simple arrangement is:

Manhole Cover Footstep Footstep Footstep Chamber Base

The spacing, number of footsteps, projection, and fixing arrangement should follow the applicable project requirements.

Technical Specification - For Quotation / Tender

Product: MS Coated PVC Footstep

Type: U-Shape & Anchor Type
Core Material: Mild Steel (MS) - 12mm dia
Coating: Virgin PVC, 20-25mm thickness
Sizes Available:
- 170mm x 260mm x 25mm
- 170mm x 165mm Anchor Type
- 250mm U Shape
- 280mm U Shape - Most Selling
- 290mm U Shape
- 375mm x 260mm Heavy Duty
Color: Orange (Standard for Manhole), Yellow, Black, Blue
Weight: 350gm to 550gm per piece
Load Capacity: Tested for 300kg+
Standard: As per Municipal Corporation & PWD Norms
HSN Code: 73269099

Manufacturing Process at Surya Engineering:
MS Bar Cutting -> U-Shape Bending -> Acid Cleaning -> PVC Dip Coating at High Temperature -> Cooling -> Quality & Load Testing -> Packing.

Where it is Used:
BMC/MCGM Manholes, Underground Drainage, STP Plants, Water Supply Chambers, Cable Trenches, Building Sump & Septic Tanks, Overhead Water Tanks, Industrial Plants.

MS Coated PVC Footstep vs Uncoated MS Footstep

MS Coated PVC Footstep	Uncoated MS Footstep
Mild steel core with PVC coating	Exposed mild steel
Coated stepping surface	Bare metal surface
Additional surface protection from coating	Relies on metal finish/treatment
Different grip and surface feel	Metal contact surface
Suitable where a coated product is specified	Suitable where uncoated steel is acceptable

The correct choice depends on the project specification and environmental conditions.

MS Coated PVC Footstep vs Plastic Footstep

A plastic or polymer footstep is manufactured primarily from a polymer material, whereas an MS Coated PVC Footstep has a mild steel core with a PVC coating.

This means the two products can have different:

Structural characteristics
Weight
Fixing methods
Material properties
Environmental performance
Cost

The right choice should be based on the application rather than appearance alone.

MS Coated PVC Footstep for Sewer & Drainage Applications

Sewer and drainage chambers can be exposed to constant moisture, dirt, wastewater, and other harsh conditions.

An MS Coated PVC Footstep for sewer chambers can be considered where a coated steel access step is specified.

For such applications, buyers should pay attention to the quality of the PVC coating and the condition of the steel core, rather than assuming that every coated footstep has the same level of protection.

MS Coated PVC Footstep for Precast Chambers

Precast concrete chambers are manufactured away from the final installation site and then transported and installed at the project location.

Footsteps may be incorporated into the chamber during manufacturing or installed according to the approved fixing method.

For precast projects, dimensions are particularly important because the footstep must match the chamber wall thickness and fixing arrangement.

MS Coated PVC Footstep Manufacturer & Supplier in India

Surya Engineering supplies MS Coated PVC Footsteps for manholes, inspection chambers, drainage structures, sewer systems, and other suitable infrastructure applications in India.

If you are looking for an MS Coated PVC Footstep manufacturer or supplier in India, provide your required size, quantity, chamber type, and delivery location.

For replacement orders, a photo with dimensions can help us understand the required configuration before supplying the product.

Bulk requirements can also be discussed for municipal, infrastructure, precast, drainage, and construction projects.

Frequently Asked Questions

What is an MS Coated PVC Footstep?

An MS Coated PVC Footstep is a mild steel access step covered with a PVC coating and installed inside manholes, inspection chambers, and other underground structures.

What is an MS Coated PVC Footstep used for?

It provides fixed stepping points that help workers enter and exit suitable manholes and chambers during inspection and maintenance.

What is the advantage of PVC coating?

PVC coating provides a protective outer layer over the MS core and gives the exposed stepping surface a different texture and finish.

Where are MS Coated PVC Footsteps used?

They are commonly used in manholes, sewer chambers, inspection chambers, drainage structures, precast concrete chambers, and underground utility structures.

Are MS Coated PVC Footsteps suitable for wet environments?

They can be used for suitable wet and underground applications, but the exact suitability depends on the steel material, PVC coating, installation, and environmental exposure.

How are MS Coated PVC Footsteps installed?

Depending on the design, they may be embedded into concrete, grouted into a prepared opening, or mechanically fixed. The manufacturer's installation instructions should be followed.